A factory reset can be helpful if your Deco S4 is malfunctioning or you want to start it over. After that, if you follow a few straightforward steps, setting up the Deco Ac1900 S4 is rather simple.
- Locate the Deco S4 unit’s reset button.
- Press the reset button with a pin for approximately one second.
- Allow the Deco to complete its reset as you wait for the light to change.
- During the initial setup, keep the Deco near your modem.
- Use an Ethernet wire to link the modem and Deco.
- On your phone, launch the Deco app and log in.
- To add a new Deco device, tap the choice.
- From the list displayed in the app, select Deco S4.
- Observe the directions on the screen.
- If the program requests it, select the sort of internet connection you have.
- Make sure your Wi-Fi name and password are memorable.
- After setup, place the second Deco in the middle.
- Await the connection between the second unit and the main Deco.
- If the connection appears to be poor, move it closer.
- Large appliances and thick walls should not be near Deco units.
- To find out if both units are online, check the app.
- If the setup appears to be stalled, restart the Deco.
- During the setup process, make sure your phone remains connected to the Deco Wi-Fi.
- When an update is offered by the app, upgrade the Deco firmware.
- When everything is ready, test the internet from several rooms.
- Reset the device and repeat the setup procedure if it doesn’t work.
Your network should be operational for daily usage after the Deco Ac1900 S4 setup is finished. Before relocating to a new house, you can also reset it. When you are beginning a new network, moving owners or resolving configuration issues, a clean reset can be helpful.
To know more about factory reset deco s4 visit our website.
Leave a Reply