On a TP-Link Deco network, you may occasionally need to go from the 5GHz spectrum to the 2.4GHz band. This is especially crucial if you’re attempting to connect smart devices like cameras, plugs, or lamps that only support 2.4GHz. Nevertheless, Deco has a unified SSID scheme, which means that it utilizes the same Wi-Fi name to seamlessly change 5GHz to 2.4GHz. So, how can a gadget be forced to use 2.4GHz?

Regretfully, Deco does not by default enable manual SSID splitting. However, there are a number of workarounds:

• Temporary Device Distance Trick: You may make the 5GHz signal weak or nonexistent by moving the device you wish to connect far enough away from the Deco unit. After that, the gadget will latch onto 2.4GHz. You may move it back once it’s attached.
• Navigate to the Deco App Settings: Go to More → Wi-Fi Settings and open the Deco app. It is possible to temporarily deactivate 5GHz on some Deco models. Devices are forced to use 2.4GHz as a result. You may re-enable 5GHz after setup.
• Guest Network Method: By enabling 2.4GHz alone, you may create a guest network. Go to More → Guest Network and turn off 5GHz to accomplish this. Next, join that network with your smart devices.
• Firmware Update: Verify whether the “Band Steering” or “IoT Network” options are supported by your Deco. Features for improved control over 2.4GHz-only devices are being added by more recent firmware releases.

Generally speaking, Deco determines the optimal connection for most devices, so you won’t need to separate the bands. However, the aforementioned tips are effective for IoT devices.

Therefore, even while Deco doesn’t allow you to “turn off 5GHz permanently,” you may still use connections wisely. In this manner, you may still use your 2.4GHz-only devices and benefit from the speed of 5GHz.

Go to our website for further details.